lexmark e260dn This is a topic that many people are looking for. daweaselonline.com is a channel providing useful information about learning, life, digital marketing and online courses …. it will help you have an overview and solid multi-faceted knowledge . Today, daweaselonline.com would like to introduce to you Lexmark E260, E360, E460, X264, X363 Fuser and Heat Errors (920 – 925). Following along are instructions in the video below:
“To another item inc video. Tutorial. If you depend on your printer. Depend on us.
Us. If your lexmark e to 60 iii. 60e. 460.
X264 or x. 363 is a fuser error. You may need to replace the fuser. The part.
Number is 40 x. 5. 3..
4. 4. On the e360. B4.
60. X. To. 64.
Or x. 360. 3f. User.
Error. Will be displayed as any error starting with 9 xx through 925. However on the e2 60 to determine if your machine has a fuser error..
You should first see a service error. This is where all of the lights on the front panel are flashing if this happens double click the green arrow button to reveal your secondary error code epenow only the second light and arrow key or flashing you have a toner sensor fuser or fan error. If this is the case double click the arrow button a final time to reveal your specific error listed here are all the errors that indicate a problem with the fuser. So let s begin replacing the fuser.
This will take about 30 minutes. And requires a phillips head screwdriver first power off and unplug. The machine. Remove the paper tray using a phillips.
Head screwdriver unscrew. The two screws on the gray covers behind the trip flip the machine on the side remove the last screw on the right side cover. There are two plastic tabs. You press n words to release.
The side cover carefully remove the cover by sliding it up towards the top of the machine. Now place the printer on the other side and remove the screw press in the two tabs and remove the side cover by pulling it up and out place. The machine upright and open..
The rear door firmly pull the door straight out to remove it unscrew the two screws on the rear cover remove the rear cover unscrew. The two screws on the east side of the top cover lift the top cover up to release. It there are a total of six screws on the rear exit guide assembly on the main board unplug. The three cables that are connected to the fuser and rear exit guide.
Now unthread. The two cables to the exit guide and remove. It unscrew. The two screws holding in the fuser pull the fuser out slightly.
Now press. The metal plate inward and lift to remove it unplug. The two cables carefully remove the fuser making sure you on thread. The cable install the new fuser sliding the cable in first plug in the two cables and attach the metal plate.
You screw in the two screws install the exit guide making sure you thread the cables through the machine screw in the six screws now finish threading. The red cable. You you plug into three cables..
You reattach the top cover and screw in the four screws attach the rear cover and screw in the two screws reattach and close the rear door reattach. The side cover top side first and screw in the side screw repeat this step for the other side cover now on the front of the printer screwing. The two remaining screws place. The machine upright and reinstall.
The paper tray now plug in and power on the machine. The printer should now be working properly to order this part or any of your. Printer needs please log on. To.
Wwwwymtcom. For free technical. Support. Give us a call at one eight hundred thirty six ” .
Thank you for watching all the articles on the topic Lexmark E260, E360, E460, X264, X363 Fuser and Heat Errors (920 – 925). All shares of daweaselonline.com are very good. We hope you are satisfied with the article. For any questions, please leave a comment below. Hopefully you guys support our website even more.